How To Use The Leather Conditioner
The leather conditioner is used leather which drying out and losing flexibility. Made from same conditioners used in tannery for new leather. Can be used on car, lounge and other upholstery leathers.
(The conditioner is only in the TRIPLE PACK. If you have the twin pack, go to the Protector.)
Don't use the conditioner until the leather has been thoroughly cleaned with the leather cleaner. This open the pores of the leather allowing the conditioner to penetrate more easily.
STEP 1: Apply a generous amount of conditioner into a soft cloth and wipe evenly over the leather leaving overnight to soak in.
STEP 2: If your leather need more conditioning, reapply then leave again, overnight.
STEP 3: The conditioner can sometimes leave a glossy, patchy residue. Where the leather is dull, the conditioner has fully penetrated, whereas the shiny areas are where it hasn't fully soaked in yet. You can either leave for a couple of days for it's work to be completed or simply wipe over the leather with a damp cloth to even it out the sheen and then dry with a clean towel.
When leather is dry, apply the leather protector.
Notes About The Conditioner
The rate of penetration can vary a lot depending on the density, condition and type of finish of leather.
For older car seats or leather which has gone stiff and boardy, you can do 2 or 3 more applications of the conditioner.
